Skip to content
Search
lg@lugsicher.com+86 21 5666 0068 Mobile +86 199 4601 0778
Menu

Installation and production

Diagnosing Position Drift in Flying Laser Marking

Separate a uniform mark offset from distortion, then check the encoder, trigger delay, conveying, alignment and compensation.

Record the symptom and speed

Make a stationary reference sample and compare marks at multiple stable line speeds. Note whether the entire mark moves or spacing and shape also change.

Verify distance feedback

Measure the real travel associated with a known number of encoder counts and check direction, mounting and repeatability. Compare feedback and item travel for slip.

Trace triggering and timing

Record the trigger point and the signal delays through the sensor, PLC and marking system. At steady speed, the distance associated with a time delay equals speed multiplied by the delay.

Check the mechanics and compensate a stable residual

Inspect the guide, belt or web for oscillation, lateral movement and changes in focus. Apply any compensation after identifying the repeatable component. Verify at speed changes and restart.

Keep comparable records

Capture actual speed, observed offset or distortion, encoder scale, trigger settings, product and relevant firmware or recipe versions. Record which change was made and the result of a repeat trial.

Discuss your application

Share your material, mark file and line conditions so we can review sample testing and integration.

Send an application enquiry