
Blister pack inspection system renderings from the Lugsicher BVI 700 / BVI 800 brochure.
BVI 700 / BVI 800 Blister Pack Inspection System
Inspect both sides of individual blister packs after die cutting. The BVI 700 uses a single-lane conveyor. The BVI 800 uses two lanes. Select the layout based on upstream discharge and target throughput.
Key advantages
- Check both sides after die cuttingImage the clear blister and aluminum foil sides. Set defect rules by pack format, product and film reflectivity.
- Choose single- or dual-lane handlingBVI 700 uses three cameras. BVI 800 uses six cameras and two reject units.
- Review results and export recordsProject-configurable records include live images and counts, filtered reports and role-based access.
How it works
- Infeed and handlingReceive die-cut packs from upstream
- Two-sided imagingImage the blister and foil
- Defect detectionApply product-specific rules
- Automatic sortingPass or reject each pack
Use representative good and defective packs to set pass/fail thresholds for each format. Confirm coverage on the actual foil and blister materials.
Inspection examples
Illustrative defect images supplied with the brochure. Verify visible defects and thresholds on your own samples.
Empty pocketA product unit is absent from the pocket.
Chipped tabletA visible chip interrupts the tablet edge.
Dark specksDark spots appear on the tablet surface.
Web spliceContrasting tape is visible at the splice.
Dented pocketPart of the blister pocket is indented.
Seal-pattern defectThe visible seal pattern is blurred or missing.
Pack wrinkleA continuous crease is visible on the pack.
Foreign materialVisible fibers or debris appear on the pack.
Specifications
| Specification | BVI 700 | BVI 800 |
|---|---|---|
| Conveyor | Single-lane belt conveyor | Dual-lane belt conveyor |
| Inspection surfaces | Blister and aluminum foil | Blister and aluminum foil |
| Design throughput (reference) | 360 packs/min | 360 packs/min |
| Basler color cameras | 3 cameras, 1.6 MP or higher | 6 cameras, 1.6 MP or higher |
| Industrial lenses | 3 lenses, 8 mm or 12 mm | 6 lenses, 8 mm or 12 mm |
| Inspection lighting | 3 lightboxes, 3–5 area or dome lights | 6 lightboxes, 6–10 area or dome lights |
| Strobe controllers | 1–2 units, 4 channels each | 2–3 units, 4 channels each |
| Reference detection size | 1 × 1 mm² | 1 × 1 mm² |
| Operator interface | 15.6-inch touchscreen | 15.6-inch touchscreen |
| Power supply | 220 V, 2500 W | 220 V, 2500 W |
| Air supply | 0.6–0.8 MPa, Ø12 mm tubing | 0.6–0.8 MPa, Ø12 mm tubing |
Throughput, detection performance and electrical configuration are reference values. Confirm actual results and requirements in sample trials and the project specification.
Installation

To evaluate the line layout, provide blister samples, upstream discharge details and target throughput.
| Measurement | Reference value |
|---|---|
| Overall dimensions (W × D × H) | 1287 × 970 × 1935 mm |
| Conveyor height from floor | 945 mm |
| Frame dimensions (W × D × H) | 1000 × 850 × 1805 mm |
| Leveling-foot spacing (W × D) | 818 × 668 mm |
Verify final dimensions and interface locations on project drawings before installation.
Downloads
BVI 700 / BVI 800 Blister Pack Inspection System brochure in English.
INDUSTRIAL


