Skip to content
Search
lg@lugsicher.com+86 21 5666 0068 Mobile +86 199 4601 0778
Menu

罗色(上海)电子科技有限公司 provides Lugsicher products and application support for industrial laser marking, print-and-apply, inspection, fume extraction and traceability, with R&D, production and service capabilities in Shanghai, China. Confirm configuration, material suitability and delivery scope using samples, site conditions and project technical documents.

Subscribe&Follow

Lugsicher WeChat QR code

Scan the code to add WeChat

Lugsicher Douyin QR code

Scan code to check Tiktok

Lugsicher Bilibili QR code

Scan the code to view Bilibili

Lugsicher YouTube channel QR code

Scan the code to view YouTube

LT Series UV Laser Coder for Flexible Packaging Film

The water-cooled LT series uses a 5 W, 355 nm UV laser to mark dates, lot codes and QR codes on compatible flexible packaging films. Test the actual laminate, coating and code position on PET, BOPP or aluminum-plastic film, then recheck code readability and packaging performance at the intended production speed.

Request a film sample test

Key advantages

  • Inline coding on moving filmApply dates, lot codes and QR codes to compatible flexible film using a 355 nm UV laser without a TTO ribbon.
  • Validation with production filmCheck contrast and the condition of the marked area before confirming film speed, positioning and trigger timing.

Roll film and flexible packaging samples

Provide representative film samples, the code content and a drawing showing code placement. For pharmaceutical packaging, identify the heat-seal area and specify the acceptance requirements for code readability and packaging performance.

Date code and black registration mark on light-colored flexible packaging film
A date code and black registration mark on a light-colored film sample. Refer to the relevant test record for film construction, line speed and code readability before and after heat sealing.

Dimensions

Dimensioned drawing of the LT series UV laser marking system

Specifications

Housing materialCNC-machined, anodized aluminum alloy
Laser sourceUV-355-W
Output power5 W
Wavelength355 nm
Marking methodHigh-precision two-dimensional scanning
Marking speed≤12,000 mm/s
Controller10.1-inch external controller
Operating systemLugtec system
CoolingWater cooling
Marking modesVector and dot matrix
Marking fieldStandard: 110 × 110 mm. Optional maximum: 600 × 600 mm.
Positioning and alignmentRed-light positioning and preview, infrared focusing
Number of text linesMultiple lines within the marking field
Production line speed0–250 m/min, depending on the material and marking content
FontsStandard library includes Simplified Chinese, Traditional Chinese, English, Korean, Russian and Arabic numerals
File formatsBMP / DXF / HPGL / JPEG / PLT
Barcodes and 2D codesCODE39, CODE128, CODE126, QR Code, Z-Code, Data Matrix and vision-readable codes
Power supply220 V AC ±15%, 50–60 Hz (110 V AC ±10%, 50–60 Hz)
Maximum power consumption≤750 W
InterfacesUSB 2.0, photoelectric trigger, synchronizer, and expansion outputs
Expansion outputsMarking status, marking completion, length count, fault, and serial number completion
Ingress protectionIP54 for the scanning galvanometer and optical path
Pollution degree2
Overvoltage categoryII
Operating temperature0–45 °C. Recommended setpoint: 25 °C. Temperature extremes may extend startup time.
System componentsOne each: 5 W laser source, 10 mm scanning galvanometer, field lens, touchscreen, power supply, and 400 W or 500 W water chiller

Confirm the operating speed on your material with the intended code content. Contact Lugsicher for current specifications and application guidance.

Downloads